中文 | ENGLISH
New police with light flashlight trial standard Time:2017-05-20 09:10:02 Click:1779
From the 08 version of the police light flashlight standard introduced nine years, with the new technology, new materials, the development of new trends, so just when the bustle of the 08 version of the police flashlight seems to keep up with the pace of the times The So the relevant departments to seek the industry experts and front-line police advice, in the second half of 2016 introduced a new version of the police light flashlight (trial) standard.
 
 
First, the new standard to modify the content
 
Compared with GA 883-2010, the main technical changes in addition to editorial changes are as follows:
1, the addition of some terminology and definitions (see 3.2, 3.3, 3.7, 3.8, 3.10);
2, modified the product classification (see 4.1, 2003 version 4.1);
3, modified the product code rules (see 4.3, 2003 version 4.3);
4, increased resistance to water resistance requirements (see 5.11);
5, modified the low temperature test requirements (see 5.3.2, 2003 version 5.3.5);
 
 
 
Second, the new standard reference standard list
 
GB / T 191 packaging and storage icon
Textiles - Tests for color fastness - evalsuation of gray - like cards for discoloration GB / T
GB / T 1804-2000 General tolerances Tolerances of linear and angular dimensions without tolerances
GB / T 2828.1-2012 Count Sampling Inspection Procedures Part 1: Batch Inspection Sampling Plan by Reception Quality Limit (AQL)
Single corrugated boxes and double corrugated boxes for transport packaging GB / T 6543-2008
Aluminum and aluminum alloy extruded profiles for general industrial use GB / T 6892-2006
GB 7000.1 lamps - Part 1: General requirements and tests
Original batteries - Part 2: Dimensions and technical requirements GB / T 8897.2-2013
Original batteries - Part 4: Safety requirements for lithium batteries GB / T 8897.4-2008
General specification for lithium - ion batteries for cellular telephoness GB / T 18287-2013
Method for measuring light intensity and beam angle in center of reflector lamp GB / T 19658-2013
GA 244 People 's Police Police Emblem Technical Standard
BOPP pressure - sensitive adhesive tape for sealing
Resin - Resistant Polyethylene Film for Packaging QB / T 2461-1999
QB / T 3811-1999 Plastic packing tape
Restriction requirements for toxic and hazardous substances in electronic information products SJ / T 11363-2006
YD 1268.2-2003 Safety requirements and test methods for mobiles communication handset lithium battery chargers
 
 
 
Third, the new version of the police flashlight flashlight performance requirements
 
1, switch work mode conversion
Light flashlight in any state should be in standby, burst flash, light, low light state, as follows:
A) flash flash priority, flashlight in any state (standby, light, low light), press the small switch, directly into the burst mode, once again press the small switch, flash flash stop;
B) by touching the big switch, to achieve light light shooting function (light touch, loose hand off);
C) press the large switch, enter the light mode, by touching the big switch, should be achieved in order: light → weak light → light → low light mode conversion, in any mode, press the switch, can be directly closed Flashlight. Open again for the light mode;
D) the use of a AA alkaline batteries should be able to normally lit flash, to achieve strong light → low light mode conversion.
2, the initial light flux
When using the 18650 battery or three AAA alkaline batteries, the initial state of the battery enters the glare mode, and the luminous flux should be greater than or equal to 150 lumens. When using an AA alkaline battery, the initial state of the battery enters the glare mode, and the luminous flux should be greater than or equal to 80 lumens.
3, light initial illumination
Use the 18650 battery or three AAA alkaline batteries, the initial state of the battery into the light mode, from the light source 5 m spot center initial illumination should be greater than or equal to 180 lx. Use the AA battery, the initial state of the battery into the light mode, from the light source 5 m spot center initial illumination should be greater than or equal to 120 lx.
4, light lighting time
The light is used as follows:
A) the use of 18650 battery, the initial state into the light mode, continuous lighting 300min, from the light source 5m spot center illumination value should be greater than or equal to 100 lx;
B) the use of three AAA alkaline batteries, the initial state into the light mode, continuous lighting 40min, from the light source 5m spot center illumination value should be greater than or equal to 100 lx;
C) use an AA alkaline battery, the initial state into the light mode, continuous lighting 5min, 5 meters away from the light source spot center illumination should be greater than or equal 100lx.
5, low light initial illumination
The initial state of the battery into the low light mode, from the light source 1m spot center of the initial illumination should be 120 lx ~ 180 lx.
6, strong light burst frequency
Strong burst flash frequency should be 8Hz ~ 10Hz.
7, beam angle
The beam angle should be 6 ° ~ 9 °.
8, battery protection function
Lithium-ion rechargeable batteries should have overcharge protection, over-discharge protection, anti-short circuit function, and in line with GB / T 18287-2013 requirements.
9, shell temperature rise
The shell temperature should be less than or equal to 25K.
10, power display function
The flashlight sets the power indicator light. When the light is turned on or off, the indicator light turns on to indicate the battery status.
11, disassembly
Do not use any tools, should be successfully completed the battery handling, replacement and charging operation.
12, lanyard strength
Lanyard to withstand 50N of tension should not break.
13, water sealing performance
In the 0.5m depth of water seal test 1h, the internal should not be water, and meet the requirements of 5.9.3.
14, environmental adaptability
15, bright flashlight in the ambient temperature -25 ℃ ± 2 ℃ ~ +55 ℃ ± 2 ℃ conditions, after 2 hours of continuous placement, should meet the requirements of 5.9.3.
16, bright flashlight in the temperature +45 ℃ ± 2 ℃, humidity 95% ± 2% RH environment, for 48h, should be consistent with the provisions of 5.9.3.
17, reliability
17.1 Switch Durability
Touch switch action 30 000 times, the switch function is normal, should be able to meet the provisions of 5.9.3.
17.2 charging plug seat connection reliability
Plug the plug plug 3 000 times, should be able to properly charge.
17.3 Falling reliability
    From the 1.5m height, light flashlight to the horizontal state, the head down state and the tail down state, respectively, fell to the cement floor, light flashlight without cracks, broken, should be able to meet the provisions of 5.9.3.
 
 
 
Fourth, the new version of the advantages of high power flashlight
 
Through the standard research is not difficult to find, the new version of the police flashlight more environmentally friendly, more practical, more human. Selection and mobiles phoness and other digital products charger interoperability charger, not only saves the social resources, leaving the charge everywhere. The size of the switch partition, so that the big switch to achieve the shot, light conversion low light, small off for the storm flash special switch, let out the alarm sub-pressure seconds to deal with emergencies to provide an effective and efficient lighting protection. Innovative implantation of ordinary alkaline 5, 7 battery compatibility model, escort for continuous law enforcement.